
3 Series Compact Tractors
3035D Compact Tractor
- Standard 4wd for Maximum Traction
- Heavy duty drive train with a gear drive transmission 8F/8R
- On-board diagnostics including Service Advisor
- See Ways To Save
Specs & Compare
Add Model
Specs & Compare | ||||
---|---|---|---|---|
Select up to 4 models to compare specifications | John Deere 3035D Compact Tractor |
Key Specs
Engine power (gross) | SAE J1995 rated power: 25.5 kW 34.2 hp 34.7 PS at 2800 rpm |
|||
---|---|---|---|---|
Power take-off (PTO) power | 22.7 kW 30.4 hp |
|||
Steering hydraulics | 16.8 L/min 4.4 gpm |
|||
Implement hydraulics | 22.4 L/min 5.9 gpm |
|||
Hitch type | Category 1 | |||
Lift capacity, 24-in. behind link arms | 944 kg 2081.2 lb |
|||
Standard transmission; forward/reverse | 8F/8R synchromesh shuttle shift gear transmission | |||
Cruise control | No | |||
Approximate shipping weight (open-station; cab) | Open operator station (OOS): 1275 kg 2811 lb Cab: Not applicable |
|||
Wheelbase | 1574 mm 62 in. |
Engine
Family | ||||
---|---|---|---|---|
Manufacturer | Yanmar® | |||
Engine model | 3TNV88C-KJPT | |||
Engine power (gross) | SAE J1995 rated power: 25.5 kW 34.2 hp 34.7 PS at 2800 rpm |
|||
Power take-off (PTO) power | 22.7 kW 30.4 hp |
|||
Rated engine speed | 2800 rpm | |||
Type | ||||
Injection pump type | High pressure common rail direct injection | |||
Aspiration | Natural | |||
Emissions compliance | Final Tier 4 | |||
Cylinders/displacement | 3 / 1.64 L 3 / 100.2 cu in. |
|||
Number of cylinders | Three | |||
Cylinder liners | Cast-in-block | |||
Bore and stroke | 88 x 90 mm 3.46 x 3.54 in. |
|||
Compression ratio | 19.1:1 | |||
Lubrication | Pressurized | |||
Cooling system | Liquid | |||
Air cleaner | Dual element | |||
Engine torque at rated speed | 87 Nm 64.2 lb-ft |
|||
Fuel tank capacity | 36.7 L 9.7 U.S. gal. |
Electrical
Battery size | 600 CCA | |||
---|---|---|---|---|
Alternator (12-V) | 55 amp | |||
Starter size | 1.4 kW 1.9 hp |
Fuel system
Type | High pressure common rail direct injection | |||
---|---|---|---|---|
Fuel consumption |
Transmission
Standard transmission; forward/reverse | 8F/8R synchromesh shuttle shift gear transmission | |||
---|---|---|---|---|
Optional transmission; forward/reverse | ||||
Left-hand reverser | Yes | |||
Transmission gear ranges | Four gears and two ranges | |||
Final drive | Spur gear | |||
Brakes | Wet disk | |||
Steering | Power steering | |||
Clutch, wet/dry | ||||
Clutch disk diameter wet clutch | ||||
Axle capacity | Front 880 kg 1940 lb Rear 1600 kg 3527 lb |
|||
Creeper | No | |||
Cruise control | No | |||
Differential lock | Yes | |||
Drawbar maximum vertical load |
Hydraulics
Type | Open center | |||
---|---|---|---|---|
Pump rated output | Steering 16.8 L/min 4.4 gpm Implement 22.4 L/min 5.9 gpm 39.2 L/min 10.3 gpm |
|||
Pump type | Single gear | |||
Maximum operating pressure | 172 bar 2495 psi |
|||
Draft control sensing | Position control | |||
Remote control valves available | Up to two (optional) |
3-point hitch
Type | Category 1 | |||
---|---|---|---|---|
Lift capacity, 24-in. behind link arms | 944 kg 2081.2 lb |
Power take-off (PTO)
Standard | At 2400 rpm: 540 rpm | |||
---|---|---|---|---|
Optional | ||||
Control | Mechanical | |||
Clutch | Transmission | |||
Brake (for mid and rear PTO) | Wet disk | |||
Engagement method |
Fluid capacities
Crankcase with filter | 4.5 L 4.8 qt |
|||
---|---|---|---|---|
Transmission and hydraulic system | 33 L 34.8 qt |
Final drive
Type | Spur gear | |||
---|---|---|---|---|
Differential lock |
Operator station
Rollover protective structure | Type Foldable ASABE S478 |
|||
---|---|---|---|---|
Platform - flat/straddle | Straddle | |||
Gear shift location - console/floor | Right-hand side |
Cab
Compliance | ||||
---|---|---|---|---|
Visibility | ||||
Air conditioning, temperature differential | ||||
Doors | ||||
Noise rating | ||||
Seat equipment |
Dimensions
Height | ||||
---|---|---|---|---|
Wheelbase | 1574 mm 62 in. |
|||
Front axle clearance | Minimum: 331 mm 13 in. Maximum: 353 mm 13.9 in. |
|||
Turning radius with brakes | 1.63 m 5.3 ft |
|||
Turning radius without brakes | ||||
Limited slip differential | ||||
Approximate shipping weight (open-station; cab) | OOS: 1275 kg 2811 lb Cab: Not applicable |
Tires
Front | R1 Bar: 7-14 R3 Turf: 27x8.5-15 R4 Industrial: 25x8.5-14 |
|||
---|---|---|---|---|
Rear | R1 Bar: 11.2-24 R3 Turf: 41x14-20 R4 Industrial: 15-19.5 |
|||
Front tread range | ||||
Rear tread spacing |
Miscellaneous
Toolbox | Yes | |||
---|---|---|---|---|
Tilt steering wheel | No | |||
12-V Outlet | No |
Additional information
Date collected |
---|
Financing
Learn more about financing options for this piece of equipment including:
- John Deere Revolving Plan account
- John Deere Multi-Use account
- Installment financing options
- Equipment leasing
- 10 Year Platinum Warranty Package
Equipment tips
Winter Maintenance with 21st Century Equipment
Posted: November 30, 2022
When preparing for the winter months, it is essential to ensure your equipment has been properly taken care of. In doing so, your machine will have an extended life span, and you will be prepared in the hopes of an early spring!
Wheat Harvest Safety Tips from 21st Century Equipment
Posted: May 31, 2022
Amber waves of grain are spotted with John Deere green, as equipment like S-Series and X-Series combines get to work. Inside these mighty machines are farmers with families who love them. This wheat harvest season, we encourage sensible safety measures like the below.
How to choose the right oil for your machine
Posted: August 11, 2021
When it comes to servicing your equipment properly, it feels like there are just so many options. Let’s explore different types of oils available and identify what to use in your hardworking equipment, from work trucks to irrigation pivots to tractors.