
All
2730 Combination Ripper
- Adjust depth in six seconds on the go
- In-cab control of each functional area
- 1/10th-in. (2.5-mm) accuracy
- Expanded tractor compatibility
Dealer Inventory:
- Ogallala, NE (1 available) - 308-284-4049
- Greeley, CO (1 available) - 970-356-3666
Specs & Compare
Add Model
Specs & Compare | ||||
---|---|---|---|---|
Select up to 4 models to compare specifications | John Deere 2730 Combination Ripper |
Key Specs
Working width | Option 1: 4.3 m 14 ft Option 2: 5.5 m 18 ft Option 3: 5.5 m Option 4: 6.7 m 22 ft Option 5: 7.9 m 26 ft |
|||
---|---|---|---|---|
Transport width | Option 1: Individual blades: 6.1 m 19.9 ft Disk gangs: 5.7 m 18.8 ft Option 2: Individual blades: 6.9 m 22.5 ft Disk gangs: 6.9 m 22.5 ft Option 3: Individual blades: 5.7 m 18.8 ft Disk gangs: 5.8 m 19.1 ft Option 4: Individual blades: 5.6 m 18.3 ft Disk gangs: 5.7 m 18.7 ft Option 5: Individual blades: 5.6 m 18.3 ft Disk gangs: 5.6 m 18.3 ft |
|||
Maximum operating depth | 40.6 cm 16 in. |
|||
Operating speed | 8-11.3 km/h 5-7 mph |
|||
Horsepower required per standard | 25.1-41 kW 34-55 hp |
|||
Standards | Spacing 61 cm 24 in. |
Tool
Configuration | Disk - Disk - Ripper - Closing Disk - Finishing Attachment | |||
---|---|---|---|---|
Option 1 | Rigid 7-standard on spacing of 61 cm 24 in. |
|||
Option 2 | Rigid 9-standard on spacing of 61 cm 24 in. |
|||
Option 3 | Folding 9-standard on spacing of 61 cm 24 in. |
|||
Option 4 | Folding 11-standard on spacing of 61 cm 24 in. |
|||
Option 5 | Folding 13-standard on spacing of 61 cm 24 in. |
|||
Option 6 | ||||
Option 7 | ||||
Option 8 | ||||
Option 9 | ||||
Option 10 | ||||
Option 11 | ||||
Option 12 | ||||
Option 13 | ||||
Option 14 | ||||
Option 15 | ||||
Option 16 | ||||
Option 17 |
Working width
Option 1 | 4.3 m 14 ft |
|||
---|---|---|---|---|
Option 2 | 5.5 m 18 ft |
|||
Option 3 | 5.5 m 18 ft |
|||
Option 4 | 6.7 m 22 ft |
|||
Option 5 | 7.9 m 26 ft |
|||
Option 6 | ||||
Option 7 | ||||
Option 8 | ||||
Option 9 | ||||
Option 10 | ||||
Option 11 | ||||
Option 12 | ||||
Option 13 | ||||
Option 14 | ||||
Option 15 | ||||
Option 16 | ||||
Option 17 |
Transport width
Option 1 | Individual blades: 6.1 m 19.9 ft Disk gangs: 5.7 m 18.8 ft |
|||
---|---|---|---|---|
Option 2 | Individual blades: 6.9 m 22.5 ft Disk gangs: 6.9 m |
|||
Option 3 | Individual blades: 5.7 m 18.8 ft Disk gangs: 5.8 m 19.1 ft |
|||
Option 4 | Individual blades: 5.6 m 18.3 ft Disk gangs: 5.7 m 18.7 ft |
|||
Option 5 | Individual blades: 5.6 m 18.3 ft Disk gangs: 5.6 m |
|||
Option 6 | ||||
Option 7 | ||||
Option 8 | ||||
Option 9 | ||||
Option 10 | ||||
Option 11 | ||||
Option 12 | ||||
Option 13 | ||||
Option 14 | ||||
Option 15 | ||||
Option 16 | ||||
Option 17 |
Depth
Maximum operating depth | 40.6 cm 16 in. |
---|
Transport clearance
Standard | 33 cm 13 in. |
---|
Underframe clearance
Maximum | 95.25 cm 37.5 in. |
---|
Speed
Operating speed | 8-11.3 km/h 5-7 mph |
---|
Horsepower
Horsepower required per standard | 25.1-41 kW 34-55 hp |
---|
Depth control
Option 1 | Single-point crank | |||
---|---|---|---|---|
Option 2 | TruSet™ tillage |
Hydraulics
Option 1 | 4 SCVs (depth control, front disk, rear conditioner, optional rolling baskets) at 17,237 kPa 2,500 psi for optimum raise times |
|||
---|---|---|---|---|
Option 2 | 5 SCVs (depth control, front disk, rear conditioner, wingfold, optional rolling baskets) at 17,237 kPa 2,500 psi for optimum raise times |
Hitch
Design | Single tube | |||
---|---|---|---|---|
Fore-aft adjustment | Hitch turnbuckle |
Standards
Spacing | 61 cm 24 in. |
|||
---|---|---|---|---|
Frame cross section |
Standards, Option 1
Trip force | Cushion-trip standard: 1,859.7 kg 4,100 lb |
|||
---|---|---|---|---|
Trip height | Shear bolt protected above: 33 cm 13 in. |
|||
Type | Parabolic with or without wear shins, straight with wear shins |
Standards, Option 2
Trip force | ||||
---|---|---|---|---|
Trip height | ||||
Type |
Standards, Option 3
Trip force | ||||
---|---|---|---|---|
Trip height | ||||
Type |
Ground engaging components
Type | Wingless, LaserRip™ II points: 12.7 cm 5 in. 17.8 cm 7 in. 25.4 cm 10 in. |
|||
---|---|---|---|---|
Coverboards | On parabolic standards: 10.2 cm 4 in. 15.2 cm 6 in. 20.3 cm 8 in. |
|||
Wear shin |
Mulching disk components
Description | X-type configuration at front of tool | |||
---|---|---|---|---|
Depth control | TruSet in-cab controls Single-point depth control |
|||
Maximum depth | 20.3 cm 8 in. |
|||
Type of standard | C-spring | |||
Base equipment blades | Solid spherical low-concavity disk blades: 660x6 mm 26x0.25 in. |
|||
Blade spacing | Individual: 45.7 cm 18 in. Effective - 22.9 cm 9 in. Disk gang: 27.9 cm 11 in. Effective: 14 cm 5.5 in. |
|||
Front frame angle | Fixed: 18 degree (angle) | |||
Rear frame angle | Fixed: 18 degree (angle) | |||
Spools | ||||
Bearings | Sealed, maintenance-free | |||
Scraper | Heavy-duty floating combination scraper (base option) |
Rear conditioner
Description | Solid-spherical low concavity closing disks (notched optional) | |||
---|---|---|---|---|
Adjustments | TruSet in-cab controls Mechanical |
|||
Base equipment blades | Individual dual mount: 45.7 cm 18 in. |
|||
Bearings | Sealed, maintenance-free | |||
Type of standard |
Wheels
Type | Tandem walk-over wheels |
---|
Rear hitch
Type |
---|
Approximate weight
Option 1 | ||||
---|---|---|---|---|
Option 2 | ||||
Option 3 | ||||
Option 4 | ||||
Option 5 | ||||
Option 6 | ||||
Option 7 | ||||
Option 8 | ||||
Option 9 | ||||
Option 10 | ||||
Option 11 | ||||
Option 12 | ||||
Option 13 | ||||
Option 14 | ||||
Option 15 | ||||
Option 16 | ||||
Option 17 |
Additional Features
Option 1 | Hydraulically adjustable finishing attachments Knife-edge rolling basket Round-bar rolling basket Coil-tine harrow |
|||
---|---|---|---|---|
Option 2 | ||||
Option 3 | ||||
Option 4 | ||||
Option 5 |
Additional information
Date collected |
---|
Tires
Type |
---|
Financing
Learn more about financing options for this piece of equipment including:
- John Deere Revolving Plan account
- John Deere Multi-Use account
- Installment financing options
- Equipment leasing
- 10 Year Platinum Warranty Package
Equipment tips
Winter Maintenance with 21st Century Equipment
Posted: November 30, 2022
When preparing for the winter months, it is essential to ensure your equipment has been properly taken care of. In doing so, your machine will have an extended life span, and you will be prepared in the hopes of an early spring!
Wheat Harvest Safety Tips from 21st Century Equipment
Posted: May 31, 2022
Amber waves of grain are spotted with John Deere green, as equipment like S-Series and X-Series combines get to work. Inside these mighty machines are farmers with families who love them. This wheat harvest season, we encourage sensible safety measures like the below.
How to choose the right oil for your machine
Posted: August 11, 2021
When it comes to servicing your equipment properly, it feels like there are just so many options. Let’s explore different types of oils available and identify what to use in your hardworking equipment, from work trucks to irrigation pivots to tractors.